2015年12月28日 星期一
2015年12月25日 星期五
【industry sourcing,wholesale industrial products,ndir co2 sensor】Radio Powers Autonomous Temperature Sensor | isweek.com
LONDON—Researchers at the Technical University of Eindhoven have developed a wireless temperature sensor that is powered by millimeter wavelength radio waves that are also used for communications.
Eindhoven student Hao Gao was due to receive a Ph.D. earlier this month for his thesis in which he discusses his development of the sensor that has an area of 2 square millimeters and weighs 1.6mg. The sensor is made using a 65nm CMOS manufacturing process.
A specially developed wireless router communicates with the sensor, which has an antenna on chip and picks up both energy and information from the millimeter wave signals. The current version of the sensor has a range of 2.5cm but researchers hope to extend this to a meter within a year.
Temperature sensor on the finger of PhD-student Hao Gao. Photo: Bart van Overbeeke.
(Source: Technical University of Eindhoven.)
The autonomous nature of the temperature sensor means it can be put behind plasterboard or included in a screed of concrete or paint.
The sensor stores the energy received and once there is enough switches on, measures the temperature and sends a signal to the router. Each temperature is indicated by a slightly different frequency at which the return signal can be sent. The router determines the temperature by the distinctive frequency.
The same technology could be used with other sensor types, such as motion, light and humidity. The tiny size of the silicon chip is expected to keep sensor costs down to around 20 cents in volume.
The title of Hao Gao’s thesis is Fully Integrated Ultra-Low Power mm-Wave Wireless Sensor Design Methods. The IC research was done in the Mixed-Signal Microelectronics group and also involved university groups specialised in electromagnetics and signal processing systems as well as the Center of Wireless Technology.
Article originally posted on EE Times Europe.
iSweek（http://www.isweek.com/）- industry sourcing,wholesale industrial products
Eindhoven student Hao Gao was due to receive a Ph.D. earlier this month for his thesis in which he discusses his development of the sensor that has an area of 2 square millimeters and weighs 1.6mg. The sensor is made using a 65nm CMOS manufacturing process.
A specially developed wireless router communicates with the sensor, which has an antenna on chip and picks up both energy and information from the millimeter wave signals. The current version of the sensor has a range of 2.5cm but researchers hope to extend this to a meter within a year.
Temperature sensor on the finger of PhD-student Hao Gao. Photo: Bart van Overbeeke.
(Source: Technical University of Eindhoven.)
The autonomous nature of the temperature sensor means it can be put behind plasterboard or included in a screed of concrete or paint.
The sensor stores the energy received and once there is enough switches on, measures the temperature and sends a signal to the router. Each temperature is indicated by a slightly different frequency at which the return signal can be sent. The router determines the temperature by the distinctive frequency.
The same technology could be used with other sensor types, such as motion, light and humidity. The tiny size of the silicon chip is expected to keep sensor costs down to around 20 cents in volume.
The title of Hao Gao’s thesis is Fully Integrated Ultra-Low Power mm-Wave Wireless Sensor Design Methods. The IC research was done in the Mixed-Signal Microelectronics group and also involved university groups specialised in electromagnetics and signal processing systems as well as the Center of Wireless Technology.
Article originally posted on EE Times Europe.
iSweek（http://www.isweek.com/）- industry sourcing,wholesale industrial products
2015年12月24日 星期四
【industry sourcing,wholesale industrial products,ndir co2 sensor,NDIR Gas Sensor,infrared co2 sensor,ndir sensor】Sony may scoop up Toshiba's image sensor business | ISweek.com
(Chris McGrath/Getty Images)
Sony may further cement its dominance in the market of
smartphone camera components by acquiring Toshiba's sensor business.
Amid an ongoing corporate restructuring, Toshiba is nearing a deal
with Sony to sell off its sensor division, according to a report today from Reuters. Sony is far and away the leading supplier of CMOS image sensors used to power smartphone cameras and some DSLR units with a 40.2 percent share of the market in 2014.The acquisition of Toshiba's division would put Sony in an even stronger position against competitors like Samsung.
Sony's smartphone business hasn't been doing well, but the company has a strong grip on the smartphone camera market. Twice this year Sony expanded its image sensor plants in Nagasaki and Yamagata, costing it more than $1.2 billion. Yet its customers, like China's Xiaomi and Apple, have turned Sony's sensor business into a blockbuster success with sales growing 40 percent last year.
Sony is taking over the image sensor business
The picture is gloomier for Toshiba. The company is undergoing a corporate accounting scandal after revelations that it overstated earnings to the tune of $1.3 billion over the last seven years. After the resignation of CEO Hisao Tanaka, interim chief executive and chairman Masashi Muromachi laid out a restructuring plan to reform the company. The image sensor sale would be one of the first moves in that process.
Source: iSweek-- industry sourcing, wholesale industrial products
2015年12月23日 星期三
【ndir sensor,semiconductor gas sensors,automotive test instruments,infrared carbon dioxide sensor,ndir gas sensor】What is the difference between photoelectric sensors and optical sensors? | www.isweek.com
A photoelectric sensor,
or photo eye, is a device used to detect the distance, absence, or
presence of an object by using a light transmitter, often infrared, and a
photoelectric receiver. They are used extensively in industrial
manufacturing. There are three different functional types: opposed
(through beam), retro-reflective, and proximity-sensing (diffused).
Electro-optical sensors are electronic detectors that convert light, or a change in light, into an electronic signal. They are used in many industrial and consumer applications, for example: Lamps that turn on automatically in response to darkness. Position sensors that activate when an object interrupts a light beam.
An optical sensor is a sensor based on an emitter, usually a ir led , and an optical captor. They can be apart components or in the same piece. Forma example used yo read the speed of a wheel, you use an optical sensor.
A photoelectric sensor is a component itself , a light variable resistor.
However searching un google can give you ambiguous results.
Electro-optical sensors are electronic detectors that convert light, or a change in light, into an electronic signal. They are used in many industrial and consumer applications, for example: Lamps that turn on automatically in response to darkness. Position sensors that activate when an object interrupts a light beam.
An optical sensor is a sensor based on an emitter, usually a ir led , and an optical captor. They can be apart components or in the same piece. Forma example used yo read the speed of a wheel, you use an optical sensor.
A photoelectric sensor is a component itself , a light variable resistor.
However searching un google can give you ambiguous results.
They
are the same. In some applications like counting and limit triggering, a
definite (strong) source of light may be used to obviate spurious
triggering by varying ambient light. Otherwise, all of them
differentiate between presence and absence of light and set the output
appropriately, i.e. the sensor converts light variation into a binary
decision. In this (digital) mode, they are called light, photoelectric
or optical switches.
In analog mode,
a photoelectric or optical sensor measures the incident light intensity
and reports this as a corresponding electrical signal.
A photoelectric sensor, or photo
eye, is a device used to detect the distance, absence, or presence of
an object by using a light transmitter, often infrared, and a photoelectric receiver. They are used extensively in industrial manufacturing.Photoelectr
An optical sensor is generally part of a larger system that integrates a source of light, a measuring device and the optical sensor. This is often connected to an electrical trigger. The trigger reacts to a change in the signal within the light sensor.One
of the features of an optical sensor is its ability to measure the
changes from one or more light beams. This change is most often based
around alterations to the intensity of the light. Optical sensors can
work either on the single point method or through a distribution of
points. With the single point method, a sole phase change is needed to
activate the sensor. In terms of the distribution concept, the sensor is
reactive along a long series of sensors or single fiber-optic array.
iSweek（http://www.isweek.com/）- wholesale sensors & transmitters
【industry sourcing,wholesale industrial products,ndir co2 sensor,NDIR Gas Sensor,infrared co2 sensor】Temperature sensors Introduction: How do the temperature sensors work? | ISweek.com
There are a lot of sensors, like Oxygen sensor, temperature sensors,
CO sensor and so on. But do you know what the sensors used in the
temperature measurement, and how do the temperature sensors work.
Temperature sensors from ISweek.com
Most common sensors for temperature measurements: Thermistors - whose resistance changes with temperature Thermocouples - which use different metals in contact to create a small voltage potential proportional to temperature Infra red sensors that measure thermal IR emissions for non-contact sensing Various bi-metal sensors that physically change shape due to coefficient of expansion differences; the mechanical movement is measured and converted to a signal.
There are many more way s to measure temperature. I work on optical sensors that used fine Bragg gratings. Bragg gratings are tiny etchings in the side near the end of a long optic fiber that make a high-Q reflector at the wavelength of the spacing. The Bragg grating is therefore a wavelength dependent reflector. We use a tunable laser to sweep past the wavelength range of the grating. As the fiber is heated or cooled, it expands or contracts effectively changing the wavelength of the gratings. We can therefore determine the precise temperature at the grating location by the wavelength of the laser light it reflects. This can be done with the laser at a distance of ten thousand or more meters from the sensor in conditions that electronics don't work well (like at the bottoms of oil wells).
Source: iSweek（http://www.isweek.com/）- wholesale sensors & transmitters
Most common sensors for temperature measurements: Thermistors - whose resistance changes with temperature Thermocouples - which use different metals in contact to create a small voltage potential proportional to temperature Infra red sensors that measure thermal IR emissions for non-contact sensing Various bi-metal sensors that physically change shape due to coefficient of expansion differences; the mechanical movement is measured and converted to a signal.
There are many more way s to measure temperature. I work on optical sensors that used fine Bragg gratings. Bragg gratings are tiny etchings in the side near the end of a long optic fiber that make a high-Q reflector at the wavelength of the spacing. The Bragg grating is therefore a wavelength dependent reflector. We use a tunable laser to sweep past the wavelength range of the grating. As the fiber is heated or cooled, it expands or contracts effectively changing the wavelength of the gratings. We can therefore determine the precise temperature at the grating location by the wavelength of the laser light it reflects. This can be done with the laser at a distance of ten thousand or more meters from the sensor in conditions that electronics don't work well (like at the bottoms of oil wells).
Source: iSweek（http://www.isweek.com/）- wholesale sensors & transmitters
2015年12月21日 星期一
【ndir co2 sensor,NDIR Gas Sensor,infrared co2 sensor,ndir sensor,semiconductor gas sensors】Tiny sensor powered by radio waves | www.isweek.com
Researchers at Eindhoven
University of Technology claim that such sensors could help advance the
nascent IoT industry. Increasingly tiny chips that measure temperature,
light, and air pollution are being deployed around cities and in smart
homes and offices. One the biggest hurdles is to make these sensors
battery-free.
"We don't want hundreds of these sensors
around our homes if we have to go around swapping the batteries all the
time," said lead researcher Prof Peter Baltus. The sensor
developed by his team measures temperature but similar sensors that
measure light, movement and humidity could also be developed.
The sensor
measures just 2 sq mm and weighs 1.6mg. It contains an antenna that
captures energy from a wireless router, it stores the energy and, once
there is enough, is able to measure the temperature and send a signal to
the router.
Currently the chip has a tiny range -
just 2.5cm but the researchers are confident that this can be extended
to 1m. "Theoretically it can work up to 5m," said Prof Baltus.
The sensor
can operate beneath a layer of paint, plastic or concrete - making it
ideal for incorporation into buildings. It is also cheap and, according
to Prof Baltus, the cost of an individual chip would be around 20 cents.
According to Gartner, the Internet of
Things market is set to explode. It predicts that cities will have 1.6
billion connected things, 518 million smart buildings, and one billion
homes in 2016.
If you want to get more about ndir co2 sensor,NDIR Gas Sensor,infrared co2 sensor,ndir sensor,semiconductor gas sensors,automotive test instruments,infrared carbon dioxide sensor,ndir gas sensor，co2 ir sensor and so on, please feel free to visit: http://www.isweek.com/
【industry sourcing,wholesale industrial products,ndir co2 sensor,NDIR Gas Sensor,infrared co2 sensor,ndir sensor】Compact sensors for high precision measurements | www.isweek.com
Micro-Epsilon presents the new, confocal chromatic sensors for the
confocalDT measurement system. The IFS2406 series stands out due to its
compact design and high precision. As well as for distance measurements
at submicrometer accuracies, the sensor is suitable for the one-sided thickness measurement of different materials.
The confocal chromatic sensors from Micro-Epsilon are non-contact,
maintenance-free, provide long-term stability and so are ideal for high
precision measurement applications. The confocalDT from Micro-Epsilon
includes the fastest controller currently available in the world and
achieves measurement rates of 10kHz using an LED light source and 70kHz
using a Xenon light source. It provides high precision measurement
results in displacement and distance measurement tasks, as well as
thickness measurement of transparent objects. A wide range of sensors
and various interface options such as Ethernet, EtherCAT, RS422 and
analogue output open versatile fields of application.
The IFS2406 sensors are specially designed for vacuum applications. These models stand out due to their compact size, submicrometer accuracy and a small measurement spot size. Due to its axial and radial measuring directions, the sensor models are extremely versatile in terms of their use. Due to their passive design they can even be used in Ex areas. The measurement channel is parameterised via a comfortable web interface which makes it unnecessary to install a separate measurement software.
As well as distance measurements on reflecting or transparent surfaces, these sensors can also be applied in one-sided thickness measurement of transparent film, plates or layers. Typical fields of application include displays and glass production, medical engineering and research and development.
If you want to get more about ndir co2 sensor,NDIR Gas Sensor,infrared co2 sensor,ndir sensor,semiconductor gas sensors,automotive test instruments,infrared carbon dioxide sensor,ndir gas sensor，co2 ir sensor and so on, please feel free to visit: http://www.isweek.com/
The IFS2406 sensors are specially designed for vacuum applications. These models stand out due to their compact size, submicrometer accuracy and a small measurement spot size. Due to its axial and radial measuring directions, the sensor models are extremely versatile in terms of their use. Due to their passive design they can even be used in Ex areas. The measurement channel is parameterised via a comfortable web interface which makes it unnecessary to install a separate measurement software.
As well as distance measurements on reflecting or transparent surfaces, these sensors can also be applied in one-sided thickness measurement of transparent film, plates or layers. Typical fields of application include displays and glass production, medical engineering and research and development.
If you want to get more about ndir co2 sensor,NDIR Gas Sensor,infrared co2 sensor,ndir sensor,semiconductor gas sensors,automotive test instruments,infrared carbon dioxide sensor,ndir gas sensor，co2 ir sensor and so on, please feel free to visit: http://www.isweek.com/
2015年12月17日 星期四
【laser crystal manufacturer，yap Laser Crystal supplier，YAG laser Crystal supplier,YAG laser Crystal manufacturer,YAG laser crystal rod】Laser direct structuring | en.ofweek.com
A-Laser offers laser
direct structuring (LDS) capabilities for producing molded interconnect
devices (MIDs), which couple integrated circuit traces and molded
thermoplastic parts.
The company's LDS process activates the
material to allow conductive traces onto the plastic surface. The
metallization process starts with a copper bath, after which time
application-specific coatings such as nickel, gold, tin, tin/lead,
silver, and silver/palladium, among others, are possible.
Applications include hearing aids, blood
glucose meters, remote patient monitoring systems, drug delivery
systems, disposable catheter interfaces, neurostimulation controllers,
and Integrated Radio-Frequency Identification (RFID) solutions.
If you want to get more about laser crystal manufacturer，yap Laser Crystal supplier，YAG laser Crystal supplier,YAG laser Crystal manufacturer,YAG laser crystal rod,YAG Bonded Laser Crystal from en.ofweek.com, please follow http://en.ofweek.com/Company/DJ-LASER-Inc--80514/.
More:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Company/Apollo-Optronics-Co-Ltd-159/
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
More:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Company/Apollo-Optronics-Co-Ltd-159/
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
【lens for laser machine,laser Machine Lens,lens supplier,lens manufacturer,optical lense supplier,imaging Lens supplier】Diode Laser Bars | en.ofweek.com
Coherent Inc. offers diode laser bars for medical applications with high batch-to-batch consistency.
At 1370 nm with a low fill factor, the
35-W CW-rated bar is designed for fiber coupling, optical beam coupling
and direct applications. Uses include surgical and aesthetic medical
applications, such as urology, lithotripsy, benign prostatic hyperplasia
treatment, vascular surgery, endovenous laser treatment, skin
rejuvenation and acne treatment.
At 1060 nm, 100-W bars and
low-fill-factor 40-W bars are used for surgical and hair-removal
applications. The 40-W bars are suitable for applications requiring
optical beam combining or fiber delivery, while the 100-W bars provide a
cost-effective pathway for high-power applications such as
kilowatt-level hair-removal stacks.
If you want to get more about lens for laser machine, laser Machine Lens, lens supplier,lens manufacturer,optical lens,optical lenses supplier,imaging Lens,imaging Lens supplier,collimating Lens and grin lens from en.ofweek.com, please follow http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/.
More:
http://en.ofweek.com/showroom/view-gallery/159-prolist-cat-0-0-0-2.html
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Apollo-Optronics-Co-Ltd-159/
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
More:
http://en.ofweek.com/showroom/view-gallery/159-prolist-cat-0-0-0-2.html
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Apollo-Optronics-Co-Ltd-159/
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
【sensor suppliers ,sensor supplier,Gas Sensor,Gas sensor Transmitter,Humidity Sensor,Infrared Sensor】Hoffmann- Krippner announces IZAL miniature position sensors | en.ofweek.com
Hoffmann- Krippner announces IZAL miniature position sensors for
confined spaces. The 4mm diameter housing of these Linear Variable
Differential Transformer (LVDT) sensors are barely larger than a
matchstick.
Utilizing differential sensing technology, these sensors ensure precise path length measurements in applications with highly confined spaces. Their interior provides a complete and powerful differential transformer measuring system with a core and coils.
The contactless, wear-free sensors for displacement and position detection achieve a linearity tolerance of ± 0.5% (optionally 0.25%) and are designed for the extremely small measuring ranges of 1, 2.5 and 5 mm.
With a housing made of chemically nickel-plated steel (protection class IP65) and a temperature range of -25 to +85° C, (which can be extended even further upon request), these miniature displacement and position sensors are suitable for use in harsh and demanding environments.
The actuation takes place via an unguided core, with the sensors being connected via a 1mm Cable (optionally available in other lengths).
If you want to know more about gas sensor,gas transmitter, humidity sensors,humidity sensors manufacturers, infrared sensors, infrared sensors suppliers,gas sensor manufacturers,sensor suppliers,o2-a2 oxygen sensor,water pressure sensors from en.ofweek.com, please feel free to visit: http://en.ofweek.com/manufacturer/sensor
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
Source: http://en.ofweek.com/new-products/Hoffmann-Krippner-announces-IZAL-miniature-position-sensors-37516
Utilizing differential sensing technology, these sensors ensure precise path length measurements in applications with highly confined spaces. Their interior provides a complete and powerful differential transformer measuring system with a core and coils.
The contactless, wear-free sensors for displacement and position detection achieve a linearity tolerance of ± 0.5% (optionally 0.25%) and are designed for the extremely small measuring ranges of 1, 2.5 and 5 mm.
With a housing made of chemically nickel-plated steel (protection class IP65) and a temperature range of -25 to +85° C, (which can be extended even further upon request), these miniature displacement and position sensors are suitable for use in harsh and demanding environments.
The actuation takes place via an unguided core, with the sensors being connected via a 1mm Cable (optionally available in other lengths).
If you want to know more about gas sensor,gas transmitter, humidity sensors,humidity sensors manufacturers, infrared sensors, infrared sensors suppliers,gas sensor manufacturers,sensor suppliers,o2-a2 oxygen sensor,water pressure sensors from en.ofweek.com, please feel free to visit: http://en.ofweek.com/manufacturer/sensor
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
Source: http://en.ofweek.com/new-products/Hoffmann-Krippner-announces-IZAL-miniature-position-sensors-37516
2015年12月16日 星期三
【 laser crystal manufacturer，yap Laser Crystal supplier，YAG laser Crystal supplier,YAG laser Crystal manufacturer,YAG laser crystal rod】Yokogawa releases TDLS8000 tunable diode laser spectrometer | en.ofweek.com
make it possible to improve plant efficiency and safety.
Product Features
1. Highly reliable measurement
The TDLS8000’s laser module includes reference cell board that improves the reliability of absorption peak detection, which is an important step in the spectral area method. In addition, the receiving unit employs an auto gain function that can automatically optimize detection sensitivity depending on the measurement object. Increasing the signal-to-noise ratio (S/N ratio) improves the reliability of measurements taken in applications with varying levels of particulates.
2. Improved operability and maintenance efficiency
The TDLS8000 comes with a large 7.5-inch LCD touchscreen that can display a greater variety of data. The touchscreen replaces the push button interface used with preceding models, making the setting of parameters easier and more intuitive. The light source module containing the laser diode is fully sealed and damage resistant. To facilitate troubleshooting and reduce downtime, this module is able to store up to 50 days’ worth of raw data that can be used by a Yokogawa response center.
3. Compact size
The TDLS8000 is certified to the IECEx, ATEX (Europe), FM (U.S.), cFM (Canada), and TIIS (Japan) explosion-proof standards. It will be suitable for installation in hazardous areas that required the use of an explosion-proof enclosure.
If you want to get more about laser crystal manufacturer，yap Laser Crystal supplier，YAG laser Crystal supplier,YAG laser Crystal manufacturer,YAG laser crystal rod,YAG Bonded Laser Crystal from en.ofweek.com, please follow http://en.ofweek.com/Company/DJ-LASER-Inc--80514/.
More:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Company/Apollo-Optronics-Co-Ltd-159/
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
Source: http://en.ofweek.com/new-products/Yokogawa-releases-TDLS8000-tunable-diode-laser-spectrometer-37398
【lens for laser machine,laser Machine Lens,lens supplier,lens manufacturer,optical lense supplier,imaging Lens supplier】Laser micromachining heads | en.ofweek.com
Quantum Composers (Bozeman, MT) has introduced a line of laser micromachining heads that integrate the company's Jewel DPSS Nd:YAG laser.
Three models are available, featuring a choice of dual- or
multi-wavelengths, independent or dual attenuation, and fixed or
adjustable polarization.
The laser micromachining heads have uses in semiconductor applications, defect removal, and line cutting.
If you want to get more about lens for laser machine,laser Machine Lens,lens supplier,lens manufacturer,optical lens,optical lenses supplier,imaging Lens,imaging Lens supplier,collimating Lens and grin lens from en.ofweek.com, please follow http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/.
More:
http://en.ofweek.com/showroom/view-gallery/159-prolist-cat-0-0-0-2.html
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Apollo-Optronics-Co-Ltd-159/
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
The laser micromachining heads have uses in semiconductor applications, defect removal, and line cutting.
If you want to get more about lens for laser machine,laser Machine Lens,lens supplier,lens manufacturer,optical lens,optical lenses supplier,imaging Lens,imaging Lens supplier,collimating Lens and grin lens from en.ofweek.com, please follow http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/.
More:
http://en.ofweek.com/showroom/view-gallery/159-prolist-cat-0-0-0-2.html
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Apollo-Optronics-Co-Ltd-159/
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
【Gas Sensor,sensor suppliers ,Gas sensor Transmitter ,sensor supplier,Humidity Sensor,Infrared Sensor】Controllers speed capacitive sensing development | en.ofweek.com
Silicon Labs' TouchXpress family
of fixed-function controllers are claimed to provide the fastest,
easiest way to add low-power capacitive touch interfaces to embedded
designs. The CPT007B and CPT112S eliminate time-consuming firmware
development, providing a simple turnkey solution for adding sleek,
touch-based user interface designs to home appliances, consumer
electronics, lighting control, medical equipment and more.
TouchXpress evaluation boards and
advanced configuration and profiling software tools available within the
Silicon Labs’ Simplicity Studio environment enable embedded developers
to get their capacitive touch applications up and running quickly and
easily.
Responding to the increasing demand for
easily implemented capacitive sensing and touch functionality in
embedded systems, Silicon Labs introduces two TouchXpress family
members:
The CPT007B GPIO switch replacement
device enables developers to quickly replace up to seven mechanical
buttons with capacitive touch sensors with no firmware development. The
GPIO interfaces provide direct on/off sensor status to the host processor.
The CPT112S capacitive sense I2C device features up to 12 sensor
inputs to simplify the addition of capacitive sense functionality for
touch-based interfaces. The I2C interface provides an easy way to track
the status of touch sensors and an interrupt pin can wake the host
processor from sleep after a proximity touch detection.
Both capacitive touch controllers
support advanced features such as moisture immunity, wake-on proximity,
touch time-out, mutually exclusive touch qualifier and buzzer feedback
for an enhanced user experience. The CPT112S device also offers a slider
control option.
Based on Silicon Labs’ proven, patented
capacitive sensing technology, the TouchXpress controllers provide
best-in-class drop-in solutions that ease touch interface development
for embedded designers of all skill levels. No firmware development,
programming or capacitive sense expertise is needed to implement
capacitive touch interfaces based on TouchXpress technology. No external
components are required, and developers can easily configure and
evaluate all capacitive sense parameters using Silicon Labs’ simple,
intuitive GUI-based Xpress Configurator and Capacitive Sense Profiler.
The TouchXpress controllers’ exceptional
energy efficiency enables long battery life, as well as the use of
smaller batteries for wearables and other portable devices. An
impressive SNR results in better reliability and touch performance,
which are important to instrumentation and control applications.
TouchXpress key features:
Industry-leading ultra-low power: active current down to 200µA with less than 1µA sleep current;
270:1 SNR enables highly robust capacitive sense solutions;
Up to 12 capacitive sensor inputs with programmable sensitivity;
Robust moisture immunity avoids false touches caused by sweat, water droplets or mist;
Wake-on proximity feature reduces overall system power consumption;
Advanced tools minimise development time; and
Small footprint (3x3mm package) for space-constrained applications.
Daniel Cooley, Vice President of
Marketing, IoT products, Silicon Labs, commented: “With the growing
demand for capacitive touch controls in embedded systems, developers are
looking for faster, easier and more economical ways to add capacitive
sense technology to their designs. Silicon Labs’ robust, low-power
TouchXpress controllers eliminate the hassle of complex firmware
development and are backed by advanced tools and a proven design
environment to implement flexible touch interfaces with minimal risk and
faster time-to-market.”
Silicon Labs simplifies capacitive touch
development with native support for TouchXpress controllers within the
Simplicity Studio development platform. This unified software
environment provides advanced tools for configuring and profiling
capacitive sense data. The easy-to-use Xpress Configurator quickly
configures touch parameters, generates required customisations and
includes factory-programming options. The Capacitive Sense Profiler
features a simple GUI for real-time capacitive sense evaluation, which
accelerates prototyping and eases the task of visualising and tuning the
system. To further speed development, Silicon Labs supports the CPT007B
and CPT112S controllers with the cost-effective SLEXP8007A and
SLEXP8008A evaluation kits, respectively.
Samples and production quantities of
TouchXpress controllers are available now in 3x3mm QFN20 packages.
Pricing for the CPT007B device in 10,000 unit quantities begins at
$0.83. Pricing for the CPT112S device in 10,000 unit quantities begins
at $0.72. The SLEXP8007A and SLEXP8008A evaluation kits are available
now for $19.00 each (MSRP).
If you want to know more about gas sensor,gas transmitter, humidity sensors,humidity sensors manufacturers, infrared sensors, infrared sensors suppliers,gas sensor manufacturers,sensor suppliers,o2-a2 oxygen sensor,water pressure sensors from en.ofweek.com, please feel free to visit: http://en.ofweek.com/manufacturer/sensor
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
【sensor suppliers ,sensor supplier,Gas Sensor,Gas sensor Transmitter,Humidity Sensor,Infrared Sensor,o2-a2 oxygen sensor】Magnetoresistive sensors offer sensitivity up to 11 Gauss
Honeywell’s latest addition to its line of magnetoresistive technologies feature highly sensitive sensor
ICs, which offer design engineers more flexibility for creating
industrial, medical and white goods devices. The Standard Power series
offers a maximum sensitivity of 11 Gauss, making the sensors among the
most sensitive in their class for standard power applications.
This allows for design with larger air gaps between the sensor
IC and the magnet or for the design engineers to decrease the total
cost of their designs by using smaller, less expensive magnets.
In addition to high sensitivity, the four Standard Power series sensor
ICs (SM351RT, SM451R, SM353RT & SM453R) feature a solid-state,
non-contact, no-glass design that makes them durable and reliable. Their
supply voltage range (3-24VDC), omnipolar operation, various package
options and wide operating temperature range from -40 to +85°C (or -40
to +185°F) simplify the design-in processes for wired applications.
Potential applications include
everything from flow sensing in HVAC and anti-tamper detection in
utility meters, to RPM sensing in exercise equipment and door position
detection.
Joshua Edberg, Director of Packaged
Sensors, Sensing and Productivity Solutions, Honeywell, commented:
"Market conditions and a greater demand for more-compact devices have
many engineers looking for alternative components that simplify their
designs without straining budgets. The Standard Power series sensor ICs
provide strong alternatives to Hall-effect ICs at a time when rare earth
magnet prices are high. They also are solid alternatives to reed
switches when high reliability and durability are major considerations.”
If you want to know more about gas sensor,gas transmitter, humidity sensors,humidity sensors manufacturers, infrared sensors, infrared sensors suppliers,gas sensor manufacturers,sensor suppliers,o2-a2 oxygen sensor,water pressure sensors from en.ofweek.com, please feel free to visit: http://en.ofweek.com/manufacturer/sensor
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
Source:http://en.ofweek.com/new-products/Magnetoresistive-sensors-offer-sensitivity-up-to-11-Gauss-37356
2015年12月15日 星期二
【laser crystal manufacturer，yap Laser Crystal supplier，YAG laser Crystal supplier,YAG laser Crystal manufacturer,YAG laser crystal rod】Amada Miyachi America Inc. launches LF series of fiber lasers | en.ofweek.com
Amada Miyachi America Inc. has announced the LF series of fiber lasers for precision microwelding.
The LF series can be focused to spot
sizes as small as 10 μm, and offers precise control of pulse width and
peak power to control the weld parameters. The lasers are available in either single-mode or multimode versions.
An internal air-to-water cooling
mechanism ensures high power and pulse-to-pulse stability irrespective
of ambient air temperature. The lasers may be operated in either
modulated or CW mode, offering all the features necessary for control of
the weld, including pulse shaping with up to 10 segments, and seam mode
with ramp-up and ramp-down capabilities.
Typical applications include the
welding of flexure arms on hard disk drives, medical spring attachment
and medical component assembly.
If you want to get more about laser crystal manufacturer，yap Laser Crystal supplier，YAG laser Crystal supplier,YAG laser Crystal manufacturer,YAG laser crystal rod,YAG Bonded Laser Crystal from en.ofweek.com, please follow http://en.ofweek.com/Company/DJ-LASER-Inc--80514/.
More:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Company/Apollo-Optronics-Co-Ltd-159/
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
Source: http://en.ofweek.com/new-products/Amada-Miyachi-America-Inc-launches-LF-series-of-fiber-lasers-37226
【lens for laser machine,laser Machine Lens,lens supplier,lens manufacturer,optical lense supplier,imaging Lens supplier】The taccor 1GHz laser offers frequency doubled light | en.ofweek.com
Laser Quantum is recognised as a leader in the production and development of Ti:Sapphire lasers
with GHz repetition rates. Recently Laser Quantum cooperated with A·P·E
Angewandte Physik und Electronic, Berlin. They have evaluated the
performance of the taccor laser with the HarmoniXX SHG second harmonic
generator to offer frequency doubled light at 1GHz.
Laser Quantum’s taccor range of ultrafast lasers
has proven to be beneficial in applications such as multi-photon
excitation microscopy, frequency comb generation and as part of
pump-probe spectroscopy equipment due to their high repetition rate and
high photon flux combined with low peak powers.
These applications however all rely on
using the fundamental emission wavelengths of the Ti:Sapphire crystal
centred around 800nm. Since the taccor has never been completely
evaluated as a primary photon source for use with frequency doubling
equipment, other applications such as picosecond ultrasound and
time-resolved photoemission spectroscopy that require high energy
photons have been unable to benefit from the taccor’s capabilities. In
the case of time-resolved photoemission spectroscopy, the high energy
photons are needed to excite then ionise the sample. The high repetition
rate would offer significantly higher resolution measurements and speed
up measurements.
In collaboration with A·P·E Angewandte
Physik und Electronic, Berlin the taccor power was evaluated as a
primary source for use with the HarmoniXX SHG frequency doubling unit
and was shown to deliver output powers up to 250mW.
The taccor has shown to have benefits in
a number of applications due to its unique high repetition rate, but
when combined with the HarmoniXX SHG, a second harmonic converter from
A·P·E, the advantages of the GHz repetition rate can be successfully
used in applications that require powerful mode-locked light at the SHG
wavelengths of Ti:sapphire.
If you want to get more about lens for laser machine,laser Machine Lens,lens supplier,lens manufacturer,optical lens,optical lenses supplier,imaging Lens,imaging Lens supplier,collimating Lens and grin lens from en.ofweek.com, please follow http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/.
More:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Apollo-Optronics-Co-Ltd-159/
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
More:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Apollo-Optronics-Co-Ltd-159/
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
Source: http://en.ofweek.com/new-products/The-taccor-1GHz-laser-offers-frequency-doubled-light-37028
Gas Sensor,sensor suppliers ,Gas sensor Transmitter ,sensor supplier,Humidity Sensor,Infrared Sensor】Magnetoresistive sensors offer sensitivity up to 11 Gauss | en.ofweek.com
Honeywell’s latest addition to its line of magnetoresistive technologies feature highly sensitive sensor
ICs, which offer design engineers more flexibility for creating
industrial, medical and white goods devices. The Standard Power series
offers a maximum sensitivity of 11 Gauss, making the sensors among the
most sensitive in their class for standard power applications.
This allows for design with larger air gaps between the sensor
IC and the magnet or for the design engineers to decrease the total
cost of their designs by using smaller, less expensive magnets.
In addition to high sensitivity, the four Standard Power series sensor
ICs (SM351RT, SM451R, SM353RT & SM453R) feature a solid-state,
non-contact, no-glass design that makes them durable and reliable. Their
supply voltage range (3-24VDC), omnipolar operation, various package
options and wide operating temperature range from -40 to +85°C (or -40
to +185°F) simplify the design-in processes for wired applications.
Potential applications include
everything from flow sensing in HVAC and anti-tamper detection in
utility meters, to RPM sensing in exercise equipment and door position
detection.
Joshua Edberg, Director of Packaged
Sensors, Sensing and Productivity Solutions, Honeywell, commented:
"Market conditions and a greater demand for more-compact devices have
many engineers looking for alternative components that simplify their
designs without straining budgets. The Standard Power series sensor ICs
provide strong alternatives to Hall-effect ICs at a time when rare earth
magnet prices are high. They also are solid alternatives to reed
switches when high reliability and durability are major considerations.”
If you want to know more about gas sensor,gas transmitter, humidity sensors,humidity sensors manufacturers, infrared sensors, infrared sensors suppliers,gas sensor manufacturers,sensor suppliers,en.ofweek.com, please feel free to visit: http://en.ofweek.com/manufacturer/sensor
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
Source:
【sensor suppliers ,sensor supplier,Gas Sensor,Gas sensor Transmitter,Humidity Sensor,Infrared Sensor】Durable High-Sensitivity Magnetoresistive Sensors |en.ofweek.com
The newest additions to Honeywell's line of magnetoresistive
technologies feature highly-sensitive sensor integrated circuits (ICs),
which offer design engineers more flexibility for creating a range of
industrial, medical and white goods devices. The Standard Power Series –
which includes four new sensor ICs – offers a sensitivity of 11 Gauss
max, making the sensors among the most highly sensitive in their class
for standard power applications. This allows for design with larger air
gaps between the sensor IC and the magnet or for the design engineers to
decrease the total cost of their designs by using smaller, less
expensive magnets.
In addition to high sensitivity, the Standard Power Series Sensor
ICs also feature a solid-state, non-contact, no-glass design that makes
them durable and reliable. Their supply voltage range (3- to 24-Vdc),
omnipolar operation, various package options and wide operating
temperature range ( -40 to 185 degrees Fahrenheit, or -40 to 85 degrees C
) simplify the design-in processes for wired applications.
Potential applications include everything from flow sensing in HVAC
and anti-tamper detection in utility meters, to RPM sensing in exercise
equipment and door position detection.
“Market conditions and a greater demand for more-compact devices
have many engineers looking for alternative components that simplify
their designs without straining budgets,” said Joshua Edberg, director
of packaged sensors, Honeywell Sensing and Productivity Solutions. “The
new Standard Power Series Sensor ICs provide strong alternatives to
Hall-effect ICs at a time when rare earth magnet prices are high. They
also are solid alternatives to reed switches when high reliability and
durability are major considerations.”
If you want to know more about gas sensor,gas transmitter, humidity sensors,humidity sensors manufacturers, infrared sensors, infrared sensors suppliers,gas sensor manufacturers,sensor suppliers,en.ofweek.com, please feel free to visit: http://en.ofweek.com/manufacturer/sensor
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
http://en.ofweek.com/Laser-id1007
http://en.ofweek.com/telecom
2015年12月14日 星期一
【laser crystal manufacturer，yap Laser Crystal supplier，YAG laser Crystal supplier,YAG laser Crystal manufacturer】Integrated Optics UAB Introduces CW Laser Modules | en.ofweek.com
Integrated Optics UAB has
introduced the MatchBox2 series of ultracompact CW laser sources for
spectroscopy, sorting and illumination.
The lasers have a size of 30 × 50 × 18 mm, and can communicate with multiple lasers
using single serial bus and unique laser IDs, allowing laser systems
with multiple sources and a single control interface. The series offers
more than 25 wavelengths with both single-longitudinal and
nonsingle-longitudinal modes. Free-space, multimode, single-mode and
polarization-maintaining fiber outputs are available.
With an extended operational
temperature range, a new serial universal asynchronous
receiver/transmitter interface and laser control software, the
OEM-dedicated laser sources meet the requirements of Raman spectroscopy,
holography and modern microscopy.
Source:
If you want to get more about laser crystal manufacturer，yap Laser Crystal supplier，YAG laser Crystal supplier,YAG laser Crystal manufacturer,YAG laser crystal rod,YAG Bonded Laser Crystal from en.ofweek.com, please follow http://en.ofweek.com/Company/DJ-LASER-Inc--80514/.
More:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Company/Apollo-Optronics-Co-Ltd-159/ http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/ http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/ http://en.ofweek.com/manufacturer/laser
http://en.ofweek.com/new-products/Integrated-Optics-UAB-Introduces-CW-Laser-Modules-37225
More:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Company/Apollo-Optronics-Co-Ltd-159/ http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/ http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/ http://en.ofweek.com/manufacturer/laser
http://en.ofweek.com/new-products/Integrated-Optics-UAB-Introduces-CW-Laser-Modules-37225
【Optical lens,Imaging Lens,Collimating Lens,Grin lens,lens for laser machine,Laser Machine Lens,lens manufacturer】Laser micromachining heads | en.ofweek.com
Quantum Composers (Bozeman, MT) has introduced a line of laser micromachining heads that integrate the company's Jewel DPSS Nd:YAG laser.
Three models are available, featuring a choice of dual- or
multi-wavelengths, independent or dual attenuation, and fixed or
adjustable polarization.
The laser micromachining heads have uses in semiconductor applications, defect removal, and line cutting.
The laser micromachining heads have uses in semiconductor applications, defect removal, and line cutting.
If you want to get more about lens for laser machine,laser Machine Lens,lens supplier,lens manufacturer,optical lens,optical lenses supplier,imaging Lens,imaging Lens supplier,collimating Lens and grin lens from en.ofweek.com, please follow http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/.
More:
http://en.ofweek.com/showroom/view-gallery/159-prolist-cat-0-0-0-2.html http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017 http://en.ofweek.com/Company/Apollo-Optronics-Co-Ltd-159/ http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/ http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
Source: http://en.ofweek.com/new-products/Laser-micromachining-heads-37308
【Gas Sensor,sensor suppliers ,Gas sensor Transmitter ,sensor supplier,Humidity Sensor,Infrared Sensor】Magnetoresistive sensors offer sensitivity up to 11 Gauss | en.ofweek.com
Honeywell’s latest addition to its line of magnetoresistive technologies feature highly sensitive sensor
ICs, which offer design engineers more flexibility for creating
industrial, medical and white goods devices. The Standard Power series
offers a maximum sensitivity of 11 Gauss, making the sensors among the
most sensitive in their class for standard power applications.
This allows for design with larger air gaps between the sensor
IC and the magnet or for the design engineers to decrease the total
cost of their designs by using smaller, less expensive magnets.
In addition to high sensitivity, the four Standard Power series sensor
ICs (SM351RT, SM451R, SM353RT & SM453R) feature a solid-state,
non-contact, no-glass design that makes them durable and reliable. Their
supply voltage range (3-24VDC), omnipolar operation, various package
options and wide operating temperature range from -40 to +85°C (or -40
to +185°F) simplify the design-in processes for wired applications.
Potential applications include
everything from flow sensing in HVAC and anti-tamper detection in
utility meters, to RPM sensing in exercise equipment and door position
detection.
Joshua Edberg, Director of Packaged
Sensors, Sensing and Productivity Solutions, Honeywell, commented:
"Market conditions and a greater demand for more-compact devices have
many engineers looking for alternative components that simplify their
designs without straining budgets. The Standard Power series sensor ICs
provide strong alternatives to Hall-effect ICs at a time when rare earth
magnet prices are high. They also are solid alternatives to reed
switches when high reliability and durability are major considerations.”
If you want to know more about gas sensor,gas transmitter, humidity sensors,humidity sensors manufacturers, infrared sensors, infrared sensors suppliers,gas sensor manufacturers,sensor suppliers,en.ofweek.com, please feel free to visit: http://en.ofweek.com/manufacturer/sensor
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
【sensor suppliers ,sensor supplier,Gas Sensor,Gas sensor Transmitter,Humidity Sensor,Infrared Sensor】Durable High-Sensitivity Magnetoresistive Sensors
The newest additions to Honeywell's line of magnetoresistive
technologies feature highly-sensitive sensor integrated circuits (ICs),
which offer design engineers more flexibility for creating a range of
industrial, medical and white goods devices. The Standard Power Series –
which includes four new sensor ICs – offers a sensitivity of 11 Gauss
max, making the sensors among the most highly sensitive in their class
for standard power applications. This allows for design with larger air
gaps between the sensor IC and the magnet or for the design engineers to
decrease the total cost of their designs by using smaller, less
expensive magnets.
If you want to know more about gas sensor,gas transmitter, humidity sensors,humidity sensors manufacturers, infrared sensors, infrared sensors suppliers,gas sensor manufacturers,sensor suppliers,en.ofweek.com, please feel free to visit: http://en.ofweek.com/manufacturer/sensor
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
In addition to high sensitivity, the Standard Power Series Sensor
ICs also feature a solid-state, non-contact, no-glass design that makes
them durable and reliable. Their supply voltage range (3- to 24-Vdc),
omnipolar operation, various package options and wide operating
temperature range ( -40 to 185 degrees Fahrenheit, or -40 to 85 degrees C
) simplify the design-in processes for wired applications.
Potential applications include everything from flow sensing in HVAC
and anti-tamper detection in utility meters, to RPM sensing in exercise
equipment and door position detection.
“Market conditions and a greater demand for more-compact devices
have many engineers looking for alternative components that simplify
their designs without straining budgets,” said Joshua Edberg, director
of packaged sensors, Honeywell Sensing and Productivity Solutions. “The
new Standard Power Series Sensor ICs provide strong alternatives to
Hall-effect ICs at a time when rare earth magnet prices are high. They
also are solid alternatives to reed switches when high reliability and
durability are major considerations.”
If you want to know more about gas sensor,gas transmitter, humidity sensors,humidity sensors manufacturers, infrared sensors, infrared sensors suppliers,gas sensor manufacturers,sensor suppliers,en.ofweek.com, please feel free to visit: http://en.ofweek.com/manufacturer/sensor
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
2015年12月11日 星期五
【lens for laser machine,laser Machine Lens,lens supplier,lens manufacturer,optical lense supplier】Laser micromachining heads | en.ofweek.com
Quantum Composers (Bozeman, MT) has introduced a line of laser micromachining heads that integrate the company's Jewel DPSS Nd:YAG laser.
Three models are available, featuring a choice of dual- or
multi-wavelengths, independent or dual attenuation, and fixed or
adjustable polarization.
The laser micromachining heads have uses in semiconductor applications, defect removal, and line cutting.
If you want to get more about lens for laser machine,laser Machine Lens,lens supplier,lens manufacturer,optical lens,optical lenses supplier,imaging Lens,imaging Lens supplier,collimating Lens and grin lens from en.ofweek.com, please follow http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/.
More:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Apollo-Optronics-Co-Ltd-159/
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
Source: http://en.ofweek.com/new-products/Laser-micromachining-heads-37308
The laser micromachining heads have uses in semiconductor applications, defect removal, and line cutting.
If you want to get more about lens for laser machine,laser Machine Lens,lens supplier,lens manufacturer,optical lens,optical lenses supplier,imaging Lens,imaging Lens supplier,collimating Lens and grin lens from en.ofweek.com, please follow http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/.
More:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Apollo-Optronics-Co-Ltd-159/
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
Source: http://en.ofweek.com/new-products/Laser-micromachining-heads-37308
【Gas Sensor,sensor suppliers ,Gas sensor Transmitter ,sensor supplier,Humidity Sensor,Infrared Sensor】Meggitt announces PCH420V vibration sensor | en.ofweek.com
Meggitt announces PCH420V vibration sensor with a programmable
transmitter allows vibration data to be accessed by HART enabled process
controllers. Plants utilizing HART networks can now easily monitor
vibration through existing networks for continuous notification of
potential failures or faults.
Process control systems monitoring temperature, lubrication, and flow
can now include vibration parameters for improved production efficiency
and equipment reliability. PCH420V transmitters easily integrate with
existing networks for quick visibility without the expense of additional
infrastructure or Cable
networks. They are powered by the network for continuous coverage,
unlike wireless solutions which only offer snapshots of asset
performance and utilize batteries that require frequent replacement.
Multi-drop installations enable up to 16 sensors to be monitored through
a single address port.
The PCH420V superimposes digital communication on top of the popular 4-20 mA loop offering unparalleled flexibility for condition based maintenance of rotating equipment. Three user configurable bands allow targeted measurements to identify machine faults like unbalance, alignment, looseness or bearing wear conditions. Root cause analysis is enhanced as the cause of excessive vibration can be determined and appropriate process improvements can be implemented. Plant personnel can program filter band frequencies of installed sensors using HART enabled PLCs or handheld communicators.
If you want to know more about gas sensor,gas transmitter, humidity sensors,humidity sensors manufacturers, infrared sensors, infrared sensors suppliers,gas sensor manufacturers,sensor suppliers,en.ofweek.com, please feel free to visit: http://en.ofweek.com/manufacturer/sensor
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
The PCH420V superimposes digital communication on top of the popular 4-20 mA loop offering unparalleled flexibility for condition based maintenance of rotating equipment. Three user configurable bands allow targeted measurements to identify machine faults like unbalance, alignment, looseness or bearing wear conditions. Root cause analysis is enhanced as the cause of excessive vibration can be determined and appropriate process improvements can be implemented. Plant personnel can program filter band frequencies of installed sensors using HART enabled PLCs or handheld communicators.
If you want to know more about gas sensor,gas transmitter, humidity sensors,humidity sensors manufacturers, infrared sensors, infrared sensors suppliers,gas sensor manufacturers,sensor suppliers,en.ofweek.com, please feel free to visit: http://en.ofweek.com/manufacturer/sensor
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
2015年12月10日 星期四
【CNC controller,CNC router,cnc cutting machine,cnc cutting machine supplier,cnc cutting machine manufacturer】Halter CNC robotic loading arm feeds anchor bolt milling machines | en.ofweek.com
FB Chain took delivery of the UK’s first robotic loading arm by Halter cnc
Automation this summer to support one of its anchor bolt milling
machines. This investment has significantly improved FB Chain’s ability
to provide a quick turnaround for customers even at short notice.
Having seen the Halter LoadAssistant in action at several reference
plants in Germany, FB Chain became the first company to employ one in
the UK in June. Based in Letchworth, Hertfordshire, FB Chain has been
manufacturing and supplying leaf chain, anchor bolts, pins and pulleys
for forklift trucks and other materials handling equipment for 30 years
and is the UK Fork Lift Truck Association’s 2015 Supplier of the Year.
“Even in mainland Europe this technology is fairly new – there are
less than 20 of them working in manufacturing facilities across the
continent – so this was a calculated risk for us. And it has paid off,”
manufacturing manager Nigel Eame says.
Since its installation the robotic loading arm, including software
from leading robotics company Fanuc, has increased output from its
assigned cnc milling machine by at least 150 leaf chain anchor bolts per day with minimal supervision.
“Like many businesses, demand at FB Chain fluctuates and having too
many or too few staff on shift affects the level of service we are able
to offer our customers. The new robot has enabled us to ramp up
production quickly without having to find extra staff and its safety
mechanisms means that it can even be left to run overnight if required,”
he says.
FB Chain aims to reduce its lead times to less than four weeks and
with the help of the Halter LoadAssistant this goal is becoming closer
and closer. The company has also recently upgraded its bar-fed turning
centres with quadruple tooling, which can likewise be run safely
overnight, to further shorten customers’ lead times. Next year the
company plans to install a fully automated manufacturing cell for its
leaf chain anchor blocks.
“At FB Chain we are constantly reviewing and optimising our
manufacturing processes and equipment for the benefit of our customers.
Our promise is to provide consistently high quality materials handling
chain and associated parts at our customers’ convenience – and
continuous improvements are required to guarantee this,” Eames
concludes.
If you want to know more about cnc machine supplier,cnc machine manufacturer,cnc cutting machine supplier,CNC router suppliers,CNC controller,CNC controller suppliers,cnc machine, cnc machining,CNC router,en.ofweek.com, please feel free to visit: http://en.ofweek.com/manufacturer/cnc-machine
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
【laser crystal manufacturer，yap Laser Crystal supplier，YAG laser Crystal supplier,YAG laser Crystal manufacturer,YAG laser crystal rod】Laser direct structuring | en.ofweek.com
A-Laser offers laser
direct structuring (LDS) capabilities for producing molded interconnect
devices (MIDs), which couple integrated circuit traces and molded
thermoplastic parts.
The company's LDS process activates the
material to allow conductive traces onto the plastic surface. The
metallization process starts with a copper bath, after which time
application-specific coatings such as nickel, gold, tin, tin/lead,
silver, and silver/palladium, among others, are possible.
Applications include hearing aids, blood
glucose meters, remote patient monitoring systems, drug delivery
systems, disposable catheter interfaces, neurostimulation controllers,
and Integrated Radio-Frequency Identification (RFID) solutions.
If you want to get more about laser crystal manufacturer，yap Laser Crystal supplier，YAG laser Crystal supplier,YAG laser Crystal manufacturer,YAG laser crystal rod,YAG Bonded Laser Crystal from en.ofweek.com, please follow http://en.ofweek.com/Company/DJ-LASER-Inc--80514/.
More:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Apollo-Optronics-Co-Ltd-159/
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
http://en.ofweek.com/manufacturer/laser
More:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Apollo-Optronics-Co-Ltd-159/
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
http://en.ofweek.com/manufacturer/laser
【Optical lens,Imaging Lens,Collimating Lens,Grin lens,lens for laser machine,Laser Machine Lens,lens manufacturer】The taccor 1GHz laser offers frequency doubled light | en.ofweek.com
Laser Quantum is recognised as a leader in the production and development of Ti:Sapphire lasers
with GHz repetition rates. Recently Laser Quantum cooperated with A·P·E
Angewandte Physik und Electronic, Berlin. They have evaluated the
performance of the taccor laser with the HarmoniXX SHG second harmonic
generator to offer frequency doubled light at 1GHz.
Laser Quantum’s taccor range of ultrafast lasers
has proven to be beneficial in applications such as multi-photon
excitation microscopy, frequency comb generation and as part of
pump-probe spectroscopy equipment due to their high repetition rate and
high photon flux combined with low peak powers.
These applications however all rely on
using the fundamental emission wavelengths of the Ti:Sapphire crystal
centred around 800nm. Since the taccor has never been completely
evaluated as a primary photon source for use with frequency doubling
equipment, other applications such as picosecond ultrasound and
time-resolved photoemission spectroscopy that require high energy
photons have been unable to benefit from the taccor’s capabilities. In
the case of time-resolved photoemission spectroscopy, the high energy
photons are needed to excite then ionise the sample. The high repetition
rate would offer significantly higher resolution measurements and speed
up measurements.
In collaboration with A·P·E Angewandte
Physik und Electronic, Berlin the taccor power was evaluated as a
primary source for use with the HarmoniXX SHG frequency doubling unit
and was shown to deliver output powers up to 250mW.
The taccor has shown to have benefits in
a number of applications due to its unique high repetition rate, but
when combined with the HarmoniXX SHG, a second harmonic converter from
A·P·E, the advantages of the GHz repetition rate can be successfully
used in applications that require powerful mode-locked light at the SHG
wavelengths of Ti:sapphire.
If you want to get more about lens for laser machine,laser Machine Lens,lens supplier,lens manufacturer,optical lens,optical lenses supplier,imaging Lens,imaging Lens supplier,collimating Lens and grin lens from en.ofweek.com, please follow http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/.
More:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Apollo-Optronics-Co-Ltd-159/
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
Source: http://en.ofweek.com/new-products/The-taccor-1GHz-laser-offers-frequency-doubled-light-37028
【sensor suppliers ,Gas sensor Transmitter ,Gas Sensor,Humidity Sensor,Infrared Sensor,sensor supplier】Balluff releases R01E photoelectric sensors for harsh environments | en.ofweek.com
These sensors offer diffuse versions with ranges up to 100 mm, polarized retroreflective with ranges up to one meter, and through beam sensor with ranges up to 2.2 meters. With a precise, uniform visible red light beam, alignment is easy and objects are reliably detected.
Not only does the small size provide flexibility in installation, but the stainless steel housing is built to survive the toughest applications in the harshest environments. Connections are made by cable or M8 three-pin quick disconnect.
These sensors are ideal for applications such as: packaging Machinery, assembly Machinery, material handling, small part detection, error proofing, and general purpose automation. ll R01E sensors offer reverse polarity and short circuit protection.
Features of the Balluff BOS R01E:
Red light
Miniature stainless steel housing
Polyamide (PA) optical surface
PNP, NPN, NO, NC outputs
IP69K
Diffuse, retroreflective and through-beam sensing modes
If you want to know more about gas sensor,gas transmitter, humidity sensors, humidity sensors manufacturers, infrared sensors, infrared sensors suppliers,gas sensor manufacturers,sensor suppliers,en.ofweek.com, please feel free to visit: http://en.ofweek.com/manufacturer/sensor
For more:
http://en.ofweek.com/Automation-id1001
http://en.ofweek.com/Manufacturing-Processing-Machinery-id1017
http://en.ofweek.com/Company/Shenzhen-Optic-King-Technology-Co-Ltd--91083/
http://en.ofweek.com/Company/Femto-Technology-Xi-An-Co-Ltd--92087/
Source: http://en.ofweek.com/new-products/Balluff-releases-R01E-photoelectric-sensors-for-harsh-environments-37260
訂閱：
文章 (Atom)